Are you a subscriber but don’t have an online account?

Register for full online access.

 
 
 
 
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Location
    vienna va and ocracoke n.c.
    Posts
    38

    Default electric drill high rpm for sanding mop

    want to use sanding mop on wood siding, need rpm higher than the drils i have, up to 3000 rpms. the old drills in the 50tys had a higher rpm as i remember. more for steel i think, my old die grinder is running very not from a bearing i think, and its rpm is 25000 rpms which is a bit high for what i'm trying to do. thank for any thoughts on this jrrjrr

  2. #2
    Join Date
    Jan 2007
    Location
    Minnesota
    Posts
    457

    Default Re: electric drill high rpm for sanding mop

    is the die grinder a pneumatic one? try a regulator on the line to slow it down, might work. Also might not have enough power then to do any real sanding. Easy to try though.

    If it is an electric, maybe a router speed control?

    It is something that can be put on, or use an angle grinder with?

  3. #3
    Join Date
    Apr 2008
    Location
    SF Bay Area (East Bay)
    Posts
    2,436

    Default Re: electric drill high rpm for sanding mop

    There's the obvious question of lead paint as well, of course.

    kevin
    “It is difficult to get a man to understand something, when his salary depends on his not understanding it.” - Upton Sinclair

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts