Are you a subscriber but don’t have an online account?

Register for full online access.

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2008

    Default Building a Sturdy Gate

    I need to build a gate for my storage yard, it will probably be two gate doors that are 4' 6'' wide each, total finish opening 9' wide and about 7' high.

    Any suggestions on designs for a long lasting gate?
    I was going to do a 4x4 boxed frame with a 45 degree 4x4 from corner to corner, set inside the boxed frame. All lagged together at each corner.
    Roller wheel at non hinge side on each door. Finish face of box with RW boards.

    Is there a better way? Gate will be painted as it is under a metal roof that covers my storage area.

  2. #2
    Join Date
    May 2013
    Greenville, SC

    Default Re: Building a Sturdy Gate

    1.5-in dia. galvanized steel tube gate frames, welded.
    4-in dia. galvanized steel tube hinge posts; serve as protective bollards at opening.
    Apply RW board cladding with screws.
    Lighter-weight and more durable than wood.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts