I have used www.screeneze.com on a number of screen rooms/porches with good results. Not the cheapest solution, but that much screen is not cheap whichever route you go.

Hey Guys,

I've got a Architect friend that needs a quality Slate and Copper roofer for some work in the Chicago area. If you are or know someone who is send me a PM with contact info.

Thanks

Nate,

Go to www.bugetwater.com, I have used them for many softeners, expansion tanks and RO units. Very good support, great prices on the various units. The first one I installed for my mother 8...

Try this John,

http://www.lpcorp.com/product_locator/

To answer your questions, it is a very good product. It is rapidly gaining favor over fiber cement (depends on the geographic market), Home...

Don't even think about sneezing! Pretty cool, no doubt about it.

LP SmartSide comes from the factory very dry, about 4% MC. Follow the recommended spacing (about 3/16") between boards and trim and you will be fine. This product will expand after installation. DO...

Jim said " I can't cope"

All evidence to the contrary. Great job!

not florida but not too far

http://festoolownersgroup.com/classifieds/sawhelper-24042/msg236913/?topicseen#msg236913

To further your investigation I would cut the union off and see if that blockage is in the copper portion of the pipe as well.

Yeah, what Ed said.

I got $20 that says you are back on Friday... Any takers!

Lou, as I understand the reason it is because you are very likely to split the very thin top edge of the plank below if you nail into it.

Bill, it is OSI Quad sealant, as Jim mentioned it comes in a lot of different colors. http://www.osipro.com/products.pl?id=QUAD

I use OSI, not cheap but it paints well and lasts.

No more work for me. I'm heading to a tropical island, maybe I'll buy my own. Don't believe me. See the e-mail I just got below.


** High Priority **

Please contact Clifford Chance Esq. at...

Any of the JLC crowd service the skinny part of Idaho? My sister lives in Spirit Lake,ID and needs some carpentry work done on her house. Exterior stairs (rebuilt or new) to accommodate a new chair...

Bubba, your local LP sales rep is Jeff Bills.

His Contact information follows. There are 3 pre-finishers that serve the Kentucky area. Call Jeff and he can direct you to the folks the serve...

Smart ass, just because you the other carpenter. OK face nailing it is......

I have a question on nailing beveled cedar siding. The siding in question is 5 1/2" and the installation calls for a 4 1/2" reveal. I had always thought you would blind nail this type of product due...

The new addition sits over a concrete pad. There is no vapor barrier between the concrete and the floor joists. The floor joists are roughly 2 feet above the concrete. There is unobstructed...

That is the HO/GC's thought. Problem as I see it the potential for more issues by cutting around the cabs, picture framing what remains in place. Then cleaning up the boards that were removed, adding...

About 15 months ago I installed a IPE floor as part of a larger project for a customer who acted as his own GC. The installation called for 4/4 TG IPE installed directly over 2x12 floor joists 12"...

Thanks Mark, lets keep that option open in case my local guy can't get it done.

Yhe cladding on the large gable is cedar shingles cut to form the shape you see. I will trying to duplicate that same look on a smaller scale on the small front gable where this new turning will go....

Thanks Mark,

I was hoping one of the forum guys with a lathe might want to crank this out. No matter, I'll check Outwater.