maybe try putting a rosette at the top four corners of the doors make sure they are all the same elevation than trim those doors with the same trim as the other doors than take flat stock a 1/4 inche...

here is a curved raised panel ceiling that I did a couple years ago.

the ceiling ended up with a white washed old driftwood look that helped tone all the different colors together. The house was built in 1926 and has a couple areas that used the pecky cypress.

265492655026551

The vanity pics

I posted a couple pictures of the new router table and the whole vanity with linen cabinet. They are custom for the space which is limited that is why the sink base is 19 1/2 inches and the cabinet...

pecky cypress is reclaimed wood from logging that sunk in the swamps a long time ago. They have been deteriorated by a bacterial fungus that causes worm like holes that mimic damage. old growth pecky...

a couple more pictures and yes that is my breakfast nook area

This was my first attemp using a new router table setup that I made to make some raised panels. A good friend has a house with pecky cypress and this is for his cottage bathroom. This is the base and...

I have been working exclusively on high end homes in florida for the last nine years( usually 4 mil. to 15 mil.) l and we never look for the metal studs unless the trim needs to move in for a wall...

Check the end of your dead bolt. The last Baldwin that I installed had a engineered point in the end of the bolt that marked the center of the hole when you pushed it against the jamb.

I think they said it cost about 4 thousand. It can be opened without power by the regular way that they open.We use the manual ones alot.They are made by rainbow stair company.

I think I fixed the link to the attic stair video that I installed last week. here is the new link. https://picasaweb.google.com/108722518840924376611/December72011

I got to install a remote controlled attic stair inside a finished home this week. The video is sideways but you can tilt your head. The top of the stair had to be finished nice also because the...

We just finished a job where they cut a rabbet in all the jambs and inset the edge of a 5/8 bullnose cornerbead and finished all walls smooth. I have a small picture that isn't great because I was...

a couple more

A different ceiling made out of clear cypress that is about 26 feet high and 24 feet wide and 30 feet long. The air conditioning is in the large beams and are twenty feet long.

another one the ceiling is about 18 feet long and 13 feet wide with four repeating eyebrows and one great big elliptical The air conditioning is all linear diffusers that are right on the perimeter...

a couple more.

more pictures one of the angles from two pictures. There are 82 degree, 78 degree, 64 degree, 52 degree, and 38 degree angle to make the joints all on radiuss 1" thick x 5 1/2" wide. there is also...

I got the opportunity to put together a nice coffered ceiling that the trim subcontractor was price too high and they decided to do it in house. They have left me alone with one helper for the last...

I wish I designed but unfortunatly it was an architech. I was handed a small piece of paper and was told that is the design. The cool part was a collegue in the office studied the design and layed...

Hi, I talked to the guy who is in charge of the framing and I made a mistake. He said that they had about one week for two guys. They have a bender at thier shop and made three quarter square stock...

They will do a pickle technique on the finish so color wasn't a factor only the texture. We even had to make a few of our own pecky marks on some of the smooth parts.

Here is two more pictures