Announcement

Collapse
No announcement yet.

A Better Puck Lock

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • A Better Puck Lock

    Here's a link to a better puck lock bracket.
    http://www.slicklocks.com/how.aspx?id=1
    http://www.industrialladder.com/prod...productID=8130

    I got broken into a year ago in my driveway overnight. They only got a couple of drivers and my Makita 7 1/4 but I had been meaning to add security but didn't get around to it. I live in a pretty good neighborhood.

    I have the old style puck brackets and locks I got from Amazon. I added screens too.

    If you have a van don't wait like I did.
    Steve

    "Get three coffins ready" - A Fistful of Dollars 1964

    http://youtu.be/KZ_7br_3y54

  • #2
    Re: A Better Puck Lock

    another pic
    Steve

    "Get three coffins ready" - A Fistful of Dollars 1964

    http://youtu.be/KZ_7br_3y54

    Comment


    • #3
      Re: A Better Puck Lock

      Why did you go with the traditional bracket rather than the Slicklock bracket?
      "If you only have a hammer, all problems look like nails"

      Vintage wood window repair and restoration in Chicago
      Wood storm windows in Chicago
      Weatherizing vintage buildings in Chicago

      Comment


      • #4
        Re: A Better Puck Lock

        I dont think it was avail a year ago.
        Steve

        "Get three coffins ready" - A Fistful of Dollars 1964

        http://youtu.be/KZ_7br_3y54

        Comment


        • #5
          Re: A Better Puck Lock

          That slicklock site isn't a very good website is it?...

          Anybody buying the Master lock brand puck locks at Home Depot or Lowes - stay away from the new gray-painted models with the sliding black plastic lock covers. The covers are useless and the painted lock bodies will start rusting away within a year. In comparison, the older chrome versions that I have are still in great shape 3-4 years later.

          Like that lock guard though - that's gonna save my butt in the winter...

          JT
          Julian Tracy
          Tracy Renovation By Design, Inc.
          www.RenovationByDesignInc.com

          Comment


          • #6
            Re: A Better Puck Lock

            Got a couple of these from Reda. Haven't used them yet. Doesn't get too bad down here. You say your locks freeze up in winter ?
            http://www.redalockguard.com/

            Got the original Master puck locks from Amazon. One mechanically froze up in a couple of months. Fortunately it was off the truck. Master lock replaced it nqa. They say keep them lubed up with WD 40.
            Steve

            "Get three coffins ready" - A Fistful of Dollars 1964

            http://youtu.be/KZ_7br_3y54

            Comment


            • #7
              Re: A Better Puck Lock

              Mine have been known to freeze up during the winter.

              Comment


              • #8
                Re: A Better Puck Lock

                Old thread, new info.

                I have used puck-locks on my van for many years. I coated the edge of the hasps with liquid rubber to help from damaging vehicles next to me, myself & others when moving close to the vehicle, but that didn't work so well since it wasn't durable. I recently got a new van & set up the puck locks. I searched the internet for solutions but found nothing. I tried applying bumpers on the edge but that didn't work or look good so I ordered Reda with hopes of figuring out a solution.

                I live in a warm climate & don't really need the weather protection Reda provides but was hoping to figure out a way to use them for bump protection somehow by either removing the magnets from one side so that when I open a door it will stay on the door portion or cutting it in half so it will stay on both portions separately.

                I cant believe no one has figured out a solution & sold it. I even contacted Master Lock & they have no suggestions. I & others have gouged our midsections front & back on them in tight parking spots & I have damaged a few vehicles next to me. Its also a hassle getting in & out always watching to see if the hasp is going to hit the adjacent vehicle.

                I had emailed Reda & included the above info & he notified me that there is a design change. The new REDA Lock Guards are completely re-designed, are 100% rubber and there are NO magnets. They are friction fit to the hasp.

                Any ideas how I might use them as bump protection?

                Comment

                Working...
                X