Any crane experts out there? In his very dusty fabrication shop, my granite guy has a three ton overhead traveling crane. It has largely stopped working. The travel motor spins but the clutch doesn't engage. The hook raises but doesn't lower. Any advice other than open up the control boxes and blow out the dust? We have pulled the contacts away from their busses and cleaned those good and opened up the box on the travel motor and blown it out as well. Could there also be dust in the control buttons? It looks weather tight but dust can get anywhere.
Bug and Defect Report Email Address
NOTICE: Thank you for your continued patience with the persistent bugs affecting the JLC Online Forums. We've setup a special email address for reporting issues and defects. Reports will go directly to the assigned IT team members. Please include screenshots if you can. There were some widespread issues over the past weekend which have been resolved. However, we know that various error pop-ups are still occurring during post composition and at other times. Thanks again. Here's the email address: