Announcement

Collapse
No announcement yet.

Best siding cutting table?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best siding cutting table?

    My first siding table was a Tapco dial-an-angle, which was okay... and I'm on my second, a Tapco EZ-Angle, which was discontinued back in '03. I like it okay, but I'm wondering if there's a better cutting table out there just waiting for me to buy it.

    I only cut a few materials on it, mostly aluminum soffit, fiber cement siding, and vinyl siding and siding accessories.

    Opinions, anyone?

  • #2
    Re: Best siding cutting table?

    We used to have a Tapco cutting table and after years of use it needed to be replaced we bought a Van Mark Trim a table. I like the Van Mark a lot better. The rail for the saw has a recessed groove for the blade to ride in so the whole thing will last a long time if you take care of it. We were also looking at there new table that will cut some of the double rows of vinyl shakes for the gable ends. It is basically the same table with a longer saw rail

    Scott

    Comment


    • #3
      Re: Best siding cutting table?

      I like my Van mark tat50, (the red one), never used a tapco but looked at one and I like how the table extends on the van mark better. Dont know if tapco has adjustable stops to go from 90 deg to your gable angle but the van mark does and it's slick.
      The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt. ~Bertrand Russell

      wausaubuilder.com

      Comment


      • #4
        Re: Best siding cutting table?

        That Van Mark Trim a Table looks sweet.

        Makes my home made cutting jigs look... home made.
        "Objects in History may be closer than they appear"

        Comment


        • #5
          Re: Best siding cutting table?

          I can't help you with anything new on the market, but when I started out in Construction we always used a "saw buck". They were great, very easy to move from job to job. I don't know why they don't make them anymore. You can still find them used every now and then.
          Jason E. Whipple
          Historic House Restoration
          Cincinnati, Ohio
          http://www.facebook.com/RestoreOhio

          Comment


          • #6
            Re: Best siding cutting table?

            i also started with the saw buck and it was a good saw until the rails rusted i think they started making them with better stainless.now i have the van mark
            its ok but the fence rails bend easy and its hard to slide sometimes not to accurate but it gets the job done.
            my next one is goin to be the new tapco with the snap stand
            Tom

            Comment


            • #7
              Re: Best siding cutting table?

              Go to sidetracksawtable.com This guy has it figured out. It uses DeWalt Rechargeable saws and there is a video proving its power. I was definately impressed. The site is new as the guy just invented it. It locks in at each pitch and cuts basically everything. Email them at tomkoresh@sidetracksawtable.com and they will send you flyers and order forms and stuff. The table is only 600 dollars too

              Comment


              • #8
                Re: Best siding cutting table?

                the "tk" in "tk123fbb" doesnt stand for "tom koresh" from the email address I hope.
                The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt. ~Bertrand Russell

                wausaubuilder.com

                Comment


                • #9
                  Re: Best siding cutting table?

                  Yeah, what's going on here?
                  I hope I do not have to get mean here.
                  MBR
                  www.train2rebuild.com
                  Twitter

                  Comment


                  • #10
                    Re: Best siding cutting table?

                    Originally posted by Bill Robinson View Post

                    I hope I do not have to get mean here. MBR
                    Yeah, well you're a lot more fun when you do.
                    Richie Poor

                    See no evil, hear no evil, speak no evil, value engineer your unit prices.

                    Comment


                    • #11
                      Re: Best siding cutting table?

                      Originally posted by Overbuilders View Post
                      Yeah, well you're a lot more fun when you do.
                      Whatever
                      NSMBR
                      www.train2rebuild.com
                      Twitter

                      Comment

                      Working...
                      X