Announcement

Collapse
No announcement yet.

bullnose corners

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • bullnose corners

    Bullnose corners... what are they?, How do you do them?

  • #2
    Re: bullnose corners

    Troy if you are referring to the standard drywall bullnose corner, there is a metal or plastic strip that is used. Here is a link to a picture of a bullnose corner bead.


    http://www.dietrichindustries.com/bi...llnosebead.gif

    Comment


    • #3
      Re: bullnose corners

      As to how they are installed, very much like the square corners. The difference is in the installation of the drywall. In the picture stamcon provided, you can see the second sheet end does'nt overlap the first, but ends at the edge of the corner. This allows for the radius of the cornerbead.It's very easy once you get the hang of it. Good luck.

      Comment


      • #4
        Re: LARGE bullnose corners

        Anybody know where I could fnd 4" and larger radius bullbose corners?

        Comment


        • #5
          Re: LARGE bullnose corners

          The largest outside corners beads I have seen have been 2 1/2 inch. I have used plaster inside coves that are much larger. Check out www.windlockinteriors.com , they carry Trimroc interior mouldings

          Comment

          Working...
          X