Announcement

Collapse
No announcement yet.

drywall to concrete board seam...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • drywall to concrete board seam...

    Hello guys.........I hang drywall infrequently..and never had to do this kind of seam........so. my ? is,how do you handle it? Just thinset is my guess..with the joint on the drywall side mudded out as usual...any help will be appreciated.Apparently this isnt the place to turn to for help..
    Last edited by steve.w; 06-21-2004, 10:34 AM.

  • #2
    Re: drywall to concrete board seam...

    Joint compound and tape works also, and produces a much smoother surface for painting.

    Comment


    • #3
      Re: drywall to concrete board seam...

      Use a setting compound if it is going to be tiled over.

      Comment


      • #4
        Re: drywall to concrete board seam...

        When I encounter this i simply use fiberglass tape and setting joint compound. Set the tile paint up to the new tile and caulk after everthing is done.

        Comment


        • #5
          Re: drywall to concrete board seam...

          thanks for all the help........its much appreciated.......

          Comment


          • #6
            Re: drywall to concrete board seam...

            Cementacious boards should be banned. DensShield looks/feels like rock. Far superior to cementacious material - much lighter too.

            I do what dakota does, fiberglass and hot mud.

            Comment

            Working...
            X