Bug and Defect Report Email Address

NOTICE: Thank you for your continued patience with the persistent bugs affecting the JLC Online Forums. We've setup a special email address for reporting issues and defects. Reports will go directly to the assigned IT team members. Please include screenshots if you can. There were some widespread issues over the past weekend which have been resolved. However, we know that various error pop-ups are still occurring during post composition and at other times. Thanks again. Here's the email address:
See more
See less

Shingle to stone transition

  • Filter
  • Time
  • Show
Clear All
new posts

  • Shingle to stone transition

    I'm siding a house and need advice on how to transition from cultured stone to cedar shingles.
    3 sides are shingles and one side, a gable end, is cultured stone. Has anyone done this? What do you put on the corners? Thanks

  • #2
    Re: Shingle to stone transition

    I installed the stone around the corners and fit the siding to the stone, pointing or caulking the joints.
    Good luck,


    • #3
      Re: Shingle to stone transition

      I have simply run the gable out past the corner, and similar to what Wayne described, allowed the wood siding to die against the stone. Be sure to wrap the corner with a healthy strip of bituthene membrane like Grace Ice and Water Shield and protect the sheathing behind the stone carefully. Are you using #30 felt and spacing the veneer away from the sheathing? I do not recommend caulking, however. My experience is that the caulk will develop (at least) hairline cracks that let water in (under heavy wind), but prevent the area behind the caulking from drying out. I prefer to let gravity and evaporation work for you.


      • #4
        Re: Shingle to stone transition

        The internet browser shut me down before I could leave the Owens Corning web address

        OC makes Cultured Stone and has excellent installation instructions on line. When you go to the site listed above, you will have 2 options:
        Open the HTML installation instructions on the left-hand side of the page
        or open one of the many PDF (adobe acrobat) technicfal files.